HomeMy WebLinkAboutCNEW2008-01589Date 1' - o
Permit #
Project Name
�oefQiAXlfk5 Anus Ce66r
COMMERCIAL CO
Planning `A
(Lindsay Boyer, Jennifer Prochazka Jennifer Reeves, C issy Hartl, Jason Schubert, Grant Wenrel, Molly Hitchcock)
Bridgette George
Development Engineers -
WA --(Alan Gibbs, Josh Norton, Carol Cotter)
City Engineer
(Bob Mosley, Jerry Jones, John Logan, Robert Bu— m�,W illiam Ethridge)
Environmental Services _
(Eaphrame Thomas, James Boykin, Pete Garcia)
Fire Department
(Eric Hurt, Eric Dotson Jerry Duffey, Steve Smith)
Drainage
(Donnie Willis)
Public Works - Sanitation
(Wally Urrutia)
Electrical Services
(Tony Michalsky)
Water/Wastewater Services
(Joe Mike Garcia, Paul Schoenfeld, Mitchell Carson)
Miscellaneous Notes
�Kt.Slrc �ec�enkc.q-7�1�1 �(nyG7-��70
(8/5/2008) Amber Carter - Re: Calling for CO for 2423 Earl Rudder Fwy S Ste 200 Page 1
From: Donnie Willis
To: Carter, Amber
Date: 8/4/2008 12:43 PM
Subject: Re: Calling for CO for 2423 Earl Rudder Fwy S Ste 200
OK with Drainage.
Donnie Willis, CFM
Environmental Engineering Technician
Certified Floodplain Manager
Public Works Department
979-764-6375 office
979-229-7632 cell
dwillis@cstx.gov
>>> On 8/4/2008 at 12:42:38 pm, in message <4896F93E.1265.003D.0@cstx.gov>, Amber Carter
wrote:
Tenant finish out
Owner Edenbach LP
Any issues, please contact Steelback Construction
@ 696-1916.
Thanks!
CITY OF COLLEGE STATION
Property Address:
Company Name:
Business Name:
Application to Stock/Fixture/Move-in Prior to
Issuance of a Certificate of Occupancy -0-->o
Property Owner or Manager Information:
Name: :5W /' Atk L&977-kt — 6-e i) # t' 1 'd ,5.0 7
Address: P
City, State, Zip:
Phone: I ' Mobile: d -7cf
Construction Company Information:
Name: Q fs �2YJ/1�
Address:
City, State, Zip:
Phone:
Mobile:
I am applying for permission to:
Move furniture and/or equipment into the building
Fixture and/or stock the building
Conduct training for staff members only
Other (Be Specific)
I hereby make application to the City of College Station to perform the action(s)
indicated above without the benefit of a Certificate of Occupancy. I certify that the above
statements are true and correct. I understand that occupancy of a structure prior to
obtaining a Certificate of Occupancy is a code violation and may result in the issuance of
citation(s). I further understand that fines associated with citations range up to $2,000.00
per day.
Applicant Signature:
Printed N me:
Date•
♦♦111111111111111111111111111111111♦♦11111111111111111111111111111♦
Building Department Representative: ' ' -
Comments:
PREPARED 8/04/08, 12:29:11 INSPECTION TICKET PAGE 27
City of College Station INSPECTOR: BUILDING INSPECTOR DATE 8/04/08
------------------------------------------------------------------------------------------------
ADDRESS . : 2423 EARL RUDDER FWY S 200 SUBDIV: RAINTREE
TENANT, NBR: TENANT FINISH OUT
CONTRACTOR STEELBACH CONSTRUCTION PHONE (979) 696-1916
OWNER EDENBACH LP PHONE
PARCEL 528500-0000-0010
APPL NUMBER: 08-00001589 COMMERCIAL, OFFICES/BANKS/PROFESSION
------------------------------------------------------------------------------------------------
PERMIT: BLDG 00 BUILDING PERMIT
REQUESTED INSP DESCRIPTION
TYP/SQ COMPLETED RESULT RESULTS/COMMENTS
------------------------------------------------------------------------------------------------
B115 01 6/10/08 OC BLDG, FRAMING TIME: 17:00
6/10/08 AP June 10, 2008 10:21:38 AM acarter.
B130 01 6/11/08 OC BLDG, INSULATION TIME: 17:00
6/12/08 AP June 11, 2006 1:25:17 PM ccourt.
B145 01 6/11/08 BI BLDG, EXT. SHEATHING FASTENER TIME: 17:00
6/11/08 CA June 11, 2008 9:18:52 AM ccourt.
June 11, 2008 1:24:55 PM ccourt.
B130 02 6/13/08 BI BLDG, INSULATION TIME: 17:00
6/13/08 CA June 13, 2008 8:15:33 AM ccourt.
exterior insulation
June 13, 2008 8:17:46 AM ccourt.
B125 01 8/04/08 B BLDG, FINAL TIME: 17:00
August 4, 2008 8:17:15 AM ccourt.
------------------- --- CONTINUED ONTO NEXT PAGE ----------------------------
Z
T
` KO
1 K. -
CNN
(8/5/2008) Amber Carter - Re: Calling for CO for Earl Rudder Fwy S Ste 200 Page 1
I
From: Paul Schoenfeld
To: Alan Gibbs; Amber Carter; Benjamin McCarty; Brenda Godfrey; Bridgett...
Date: 8/5/2008 7:57 AM
Subject: Re: Calling for CO for 2423 Earl Rudder Fvvy S Ste 200
NO for CO.
Main line valve buried has been flagged .
Paul
>>> Amber Carter 8/4/2008 12:42 PM >>>
Tenant finish out
Owner Edenbach LP
Any issues, please contact Steelback Construction
@ 696-1916.
Thanks!
City of College Station
1101 TEXAS AVENUE
COLLEGE STATION TX 77840
T E M P O R A R Y C O
T E M P O R A R Y
Issue Date . . . . . .
Expiration Date
Parcel Number
Property Address . . .
Subdivision Name . . .
Legal Description . . .
Property Zoning
8/05/08
8/15/08
528500-0000-0010
2423 EARL RUDDER FWY S 200
COLLEGE STATION TX 77840
RAINTREE
RAINTREE, LOT RESERVE 1 , ACRE
S 2.04
ADMIN. PROFESSIONAL
Owner . . . . . . . . . EDENBACH LP
Contractor . . . . . . STEELBACH CONSTRUCTION
979 696-1916
Application number 08-00001589 000 000
Description of Work COMMERCIAL, OFFICES/BANKS/PROFESSION
Construction type . . . COMBUSTIBLE (UNPROTECTED)
Occupancy type . . . . BUSINESS
Flood Zone . . . . . .
Special conditions . .
1. NEED TO REPAIR EMERGENCY LIGHTING IN HALLWAY.
2. NEED TO RAISE MAIN LINE VALVE TO GRADE.
3. NEED EMERGENCY HARDWARE ON REAR EXIT DOOR.
4. NEED TO REMOVE EXIT SIGN LEADING TO EXIT SPACE.
Approved . . . . . . . CJAAAr
Building O ficial
VOID UNLESS SIGNED BY BUILDING OFFICIAL
City of College Station
1101 TEXAS AVENUE
COLLEGE STATION TX 77840
T E M P O R A R Y C O
T E M P O R A R Y
Issue Date . . . . . . 8/15/08
Expiration Date . . . . 8/22/08
Parcel Number . . . . .
Property Address . . .
Subdivision Name . . .
Legal Description . . .
Property Zoning
528500-0000-0010
2423 EARL RUDDER FWY S 200
COLLEGE STATION TX 77840
RAINTREE
RAINTREE, LOT RESERVE 1 , ACRE
S 2.04
ADMIN. PROFESSIONAL
Owner . . . . . . . . . EDENBACH LP
Contractor . . . . . . STEELBACH CONSTRUCTION
979 696-1916
Application number 08-00001589 000 000
Description of Work COMMERCIAL, OFFICES/BANKS/PROFESSION
Construction type . . . COMBUSTIBLE (UNPROTECTED)
Occupancy type . . . . BUSINESS
Flood Zone . . . .
Special conditions
NEED TO RAISE MAIN LINE VALVE TO GRADE.
Approved . . . . .
Bu
414.
Off cial
VOID UNLESS SIGNED BY BUILDING OFFICIAL
F.• - axve.�'...sacx"s;;64`r� -�Y..tu^3"..3'. ..X..a� .Re. Ysh. �� .. 33P!...+9mR� mn�... m. 3..w. � .^w.,-¢^ ..,.:, .e
Chris Haver Re: Calling for CO for 2423 Earl Rudder Fwy S Ste 200 Page 1
From: Joe Garcia
To: Alan Gibbs; Amber Carter; Benjamin McCarty; Brenda Godfrey; Bridgette George;
Carol Cotter; Chris Haver; Cindy Dillard; Crissy Hard; Donnie Willis; Doug Ervin; Eaphrame Thomas;
Eric Dotson; Eric Hurt; Erika Bridges; Gina Southerland; Israel Koite; James Boykin; Jason Schubert;
Jeffrey Missal; Jennifer Prochazka; Jerry Duffey; Jerry Jones; Joe Wilbert III; John Logan; Julie Caler;
Keith Tinker; Lauren Hovde; Lindsay Boyer; Matthew Robinson; Mitchell Carson; Molly Hitchcock; Paul
Schoenfeld; Pete Garcia; Robert Bullock; Sean Dwyer; Steve Smith; Tony Michalsky; Wally Urrutia
Date: 8/20/2008 1:55:17 PM
Subject: Re: Calling for CO for 2423 Earl Rudder Fwy S Ste 200
MAIN LINE VALVE HAS BEEN EXPOSED & BROUGHT TO GRADE. OK FOR CO. JMG
>>> Paul Schoenfeld 08/05/08 7:57 AM >>>
NO for CO.
Main line valve buried has been flagged .
Paul
>>> Amber Carter 8/4/2008 12:42 PM >>>
Tenant finish out
Owner Edenbach LP
Any issues, please contact Steelback Construction
@ 696-1916.
Thanks!
BUILDING PERMIT
CITY OF COLLEGE STATION '
1101 TEXAS AVENUE, COLLEGE STATION, TX 77840
PHONE: (979)764-3570 FAX: (979)764-3496
http://bpinspect.cstx.gov
----------------------------------------------------------------------------
Application Number . . . . .
Application pin number . . .
Property Address . . . . . .
Property ID:
R #.
Tenant nbr, name . . . . . .
Application type description
Subdivision Name . . . . . .
Property Use . . . . . . . .
Property Zoning . . . . . . .
Application valuation . . . .
Owner
EDENBACH LP
2911 TEXAS AVE S
STE 201
COLLEGE STATION TX 77845
08-00001589
994327
2423 EARL RUDDER FWY
528500-0000-0010
R38297
Date 6/03/08
S 200
TENANT FINISH OUT
COMMERCIAL, OFFICES/BANKS/PROFESSION
RAINTREE
BUSINESS
ADMIN. PROFESSIONAL
46750
Contractor
STEELBACH CONSTRUCTION
2911 TEXAS AVE S STE. 201
COLLEGE STATION TX 77845
(979) 696-1916
--- Structure Information 000 000 OFFICE TENANT FINISHOUT
Construction Type
. . . . . COMBUSTIBLE (UNPROTECTED)
Occupancy Type .
. . . . . BUSINESS
Other struct info
. . . . . EXTERIOR WALL TYPE BRICK
IMPACT/PRORATA FEES PAID N/A
FOUNDATION TYPE SLAB
HEATED AREA 2126.00
INTERIOR WALL TYPE SHEETROCK
SEWER TYPE PUBLIC
TRAFFIC IMPACT ANAL (TAZ) 224.00
----------------------------------------------------------------------------
Permit . . . . .
. BUILDING PERMIT
Additional desc .
. AC
Permit pin number
. 577262
Permit Fee . . .
. 245.00 Plan Check Fee .00
Issue Date . . .
. 6/03/08 Valuation . . . . 46750
Expiration Date .
. 11/30/08
Qty Unit Charge
Per Extension
BASE FEE 15.00
46.00 5.0000
THOU BLDG, VAL 1001-50000 230.00
----------------------------------------------------------------------------
Special Notes and
Comments
PROVIDE ADDRESS
ON COMMERCIAL BUILDINGS -FRONT: 5" ADDRESS
NUMBERS, AND ON
REAR DOOR(S): 2" HIGH ADDRESS NUMBERS AND
NAME OF BUSINESS.
FOR MULTI -FAMILY RESIDENTIAL PROVIDE UNIT
NUMBER ON FRONT
DOOR AND IDENTIFY EACH UNI FROM A REAR FIRE
------------------------------------------------
BUILDING DEPT
----A -y-------
REPRESENTATIVE:
APPLICANT:
BUILDING PERMIT
CITY OF COLLEGE STATION
1101 TEXAS AVENUE, COLLEGE STATION, TX 77840
PHONE: (979)764-3570 FAX: (979)764-3496
http://bpinspect.cstx.gov
Application Number . . . . . 08-00001589
Application pin number . . . 994327
Page 2
Date 6/03/08
Special Notes and Comments
LANE. IDENTIFY MULTI -FAMILY BUILDINGS WITH 12" BUILDING
NUMBERS, VISIBLE FROM ALL ADJACENT/NEARBY FIRE LANES. ALL
NUMBERS AND LETTERS SHALL HAVE CONTRASTING BACKGROUNDS.
PLATFORM FOR MECHANICAL EQUIPMENT AND/OR ACCESS PASSAGEWAY
MAY HAVE TO BE ELEVATED TO ALLOW FOR REQUIRED R-VALUE ATTIC
INSULATION.
PROVIDE ATTIC ACCESS OPENING OF 2011x 30" WITH A CLEAR HEIGHT
OF 30" MINIMUM HEADROOM IN THE ATTIC SPACE ABOVE THE ACCESS
OPENING.
PROVIDE ATTIC ACCESS WITHIN 20' OF APPLIANCES; EXCEPTION:
PROVIDE ATTIC ACCESS WITHIN 50' OF APPLIANCES IF PASSAGEWAY
IS UNOBSTRUCTED AND NOT LESS THAN 6' HIGH AND 22" WIDE FOR
ITS ENTIRE LENGTH PER SECTION 306.3, 2006 IMC.
Shall advertise only the name of, uses of, or goods or
services available within the building, or tenant lease
space, to which the banner is attached.
Shall be mounted parallel to the face of the building.
Shall not be cantilevered away from the structure.
Shall not extend more than one foot from any exterior
building face, mansard, awning, or canopy.
Shall not obstruct any window, door, stairway, or other
opening intended for ingress or for needed ventilation or
light.
Shall not be attached to any tree, fence, or public utility
pole.
NOTE FROM WATER DEPT--REDUCED PRESSURE ASSEMBLY REQUIRED FOR
CAR WASH, POSTMIX CARBONATER, AND HEATING/AC WITH DIRECT
CONNECTION TO WATER SUPPLY, WATER SUPPLY LINES SERVING THE
THIRD FLOOR OR HIGHER, AND LAWN IRRIGATION SYSTEMS.
ALL DEVICES MUST BE TESTED UPON INSTALLATION BY CERTIFIED
TESTER REGISTERED WITH THE CITY OF COLLEGE STATION PUBLIC
UTILITIES DEPT. LAWN IRRIGATION MAY USE A PRESSURE VACCUM
BREAKER INSTALLED PER AWWA STANDARDS AND CITY'S ORD #2394.
ALL DEVICES MUST BE INSTALLED PER AWWA AND CITY'S ORD#2394
PROVIDE COMBUSTION AIR: FOR GAS -FIRED APPLIANCES PER SECTION
304 OF THE 2006 INTERNATIONAL FUEL GAS CODE; FOR OTHER FUELS
TO COMPLY WITH CHAPTER 7 OF THE 2006 IMC.
*ELECTRICAL SHALL BE INSTALLED PER 2005 National Electrical
Code & LOCAL AMENDMENTS
PROVIDE EXTERIOR LANDING LEVEL WITH THE INTERIOR FLOOR FOR
REQUIRED EXIT DOOR(S) j
---------------------------------------------✓----d�J -- --•----------
BUILDING DEPT REPRESENTA_TIV
APPLICANT:
BUILDING PERMIT
CITY OF COLLEGE STATION
1101 TEXAS AVENUE, COLLEGE STATION, TX 77840
PHONE: (979)764-3570 FAX: (979)764-3496
http://bpinspect.cstx.gov
Application Number . . . . . 08-00001589
Application pin number . . . 994327
Special Notes and Comments
Page 3
Date 6/03/08
PROVIDE FIRE EXTINGUISHER(S) - VERIFY LOCATION AND PLACEMENT
WITH THE FIRE MARSHALL'S OFFICE (MIN. 2A10BC)
*Assure Proper GFI Locations, Including One Within 25' Of
Outside A/C Unit
Shall advertise only the name of, uses of, or goods or
services available within the building, or tenant lease
space, to which the sign is attached;
Shall be parallel to the face of the building;
Shall not extend more than one foot from any exterior
building face, mansard, awning, or canopy;
Shall not obstruct any window, door, stairway, or other
opening intended for ingress or for needed ventilation or
light; and
Shall not be attached to any
pole.
PROVIDE MINIMUM 42" CLEARANCE
CLOSET TO EDGE OF LAVATORY OR
ACCESSIBLE STANDARDS.
*Wall and Ceiling Insulation
If Wall to Window Ratio is up
R-13 and R-30, above 15% the
to R-38.
tree, fence, or public utility
FROM CENTER LINE OF WATER
WALL TO COMPLY WITH ANSI 2003,
are as follows respectively.
to 1501 the Values Shall be
Ceiling Insulation is Increased
PROVIDE A KNOX BOX FOR FIRE DEPARTMENT ACCESS. A KEY FOR
EACH SHELL BUILDING AND/ OR TENANT DOOR IS REQUIRED.
REQUIRED EXIT DOORS SHALL BE OPENABLE FROM THE INSIDE
WITHOUT THE USE OF A KEY,TOOL OR SPECIAL KNOWLEDGE/EFFORT
INTERIOR LIGHTING SHALL MEET THE CONTROLS AND WATTAGE
REQUIREMENTS OF SECTION 505 OF THE 2006 INTERNATIONAL ENERGY
CONSERVATION CODE.
All roof and ground -mounted mechanical equipment shall be
sreened from view or isolated so as not to be visible from
any public right-of-way or residential district within 150
feet of the subject lot, measured from a point five feet
above grade. Such screening shall be coordinated with the
building architecture and scale to maintain a unified
appearance. Acceptable methods of screening rooftop
equipment may include, but are not limited to encasement,
parapet walls, or partition screens.
CONSTRUCTION ACTIVITY BETWEEN THE HOURS OF 10:00 PM AND
7:00 AM MUST COMPLY WITH THE NOISE ORDINANCE (MAX. 55 DBA)
All outdoor lighting must be in compliant with Section
----------------------------------------- ------ ------ -- -.--------
BUILDING DEPT REPRESENT WVEy
APPLICANT:
BUILDING PERMIT
CITY OF COLLEGE STATION
1101 TEXAS AVENUE, COLLEGE STATION, TX 77840
PHONE: (979)764-3570 FAX: (979)764-3496
http://bpinspect.cstx.gov
----------------------------------------------------------------------------
Page 4
Application Number . . . . . 08-00001589 Date 6/03/08
Application pin number . . . 994327
----------------------------------------------------------------------------
Special Notes and Comments
7.10, Outdoor lighting Standards of the City's Unified
Development Ordinance
PROVIDE PANIC HARDWARE ON EXIT DOORS
*If PEX water supply piping is sleeved below the slab, seal
annular space at ends with caulk, foam or other means.
Also assure proper protection of pipe to U.V. light.
*ANY CHANGES OR ALTERATIONS TO SUBMITTED PLANS MUST BE
RESUBMITTED AND APPROVED BEFORE WORK IS DONE IN ORDER TO
ASSURE CODE COMPLIANCE
*POST PERMIT CARD ON JOB SITE TO BE VISIBLE FROM ROAD
*WHEN WATER MAIN PRESSURE EXCEEDS 80 PSI, AN APPROVED
PRESSURE REDUCING VALVE SHALL BE PROVIDED THAT LIMITS THE
MAXIMUM STATIC WATER PRESSURE TO 80 PSI
*RECESSED LIGHTING INSTALLED IN THE BUILDING ENVELOPE SHALL
BE IC RATED AND SEALED TO PREVENT AIR LEAKAGE
*SHOWERS AND TUB/SHOWER COMBINATIONS SHALL BE EQUIPPED WITH
AN ANTI -SCALD VALVE THAT LIMITS WATER TEMPERATURE TO 120
DEGREES
*THE COMBINED SOLAR HEAT GAIN COEFFICIENT OF ALL GLAZED
FENESTRATION/WINDOW PRODUCTS DEPENDING ON PERCENTAGE OF WALL
TO GLAZING/WINDOW RATIO UP TO 2001 A .40 OR LOWER FACTOR AND
ABOVE 200-o TO 30% A .35 FACTOR OR LOWER SHALL BE MET.
*U-Factor Ratings for Window % up to 15% is .65, from 15% to
20% is .55, from 20% to 250-. is .54 and above 25% is .46 or
lower.
AS PER THE ZONING ORDINANCE SECTION 12.3.L; ATTACHED
SIGNS SHALL NOT EXTEND MORE THAN ONE FOOT AWAY
FROM EXTERIOR BUILDING FACE
*ALL SILLS AND BOTTOM PLATES IN CONTACT WITH CONRETE MUST BE
TREATED OR NATURALLY RESISTANT TO INSECTS AND DECAY
Shall advertise only the name of, uses of, or goods or
services available within the building or tenant lease space
to which the sign is attached,
Shall be parallel to the face of the building;
Shall not be cantilevered away from the structure;
Shall not extend more than one foot from any exterior
building face, mansard, awning, or canopy;
Shall not obstruct any window, door, stairway, or other
opening intended for ingress or for needed ventilation or
light; and
Shall not be attached to any tree or public utility pole.
------------- -----------
BUILDING DEPT REPRESEN
APPLICANT:
BUILDING PERMIT
CITY OF COLLEGE STATION
1101 TEXAS AVENUE, COLLEGE STATION, TX 77840
PHONE: (979)764-3570 FAX: (979)764-3496
http://bpinspect.cstx.gov
----------------------------------------------------------------------------
Page 5
Application Number . . . . . 08-00001589 Date 6/03/08
Application pin number . . . 994327
----------------------------------------------------------------------------
Special Notes and Comments
*TEMPERED GLASS REQUIRED IN WINDOWS WITHIN 24" OF DOORS IN
ADJACENT WALLS
*ALL PLUMBING, ELECTRICAL, AND HVAC (mechanical) WORK MUST
BE PERFORMED BY LICENSED CONTRACTORS. CONTACT BUILDING
DEPARTMENT FOR INSPECTIONS PRIOR TO COVERING ANY WORK
PROVIDE 50 CFM EXHAUST FAN IN SHOWER ROOM. PROVIDE 75 CFM
EXHAUST FANS IN EACH RESTROOM TO COMPLY WITH TABLE 403.3 OF
THE 2006 IMC.
----------------------------------------------------------------------------
Fee summary Charged Paid Credited Due
---------------------------------------------------------
Permit Fee Total
Plan Check Total
Grand Total
245.00 245.00
.00 .00
245.00 245.00
BUILDING DEPT REPRESENT
APPLICANT:
isl
i
CITY OF QQ�, q, .S.TATIQN
Pk_hlgdlki (oAnrn, S�
APPLICATION FOR BUILDING PERMIT
1101 TEXAS AVENUE
COLLEGE STATION, TX 77840
(979) 764-3570 (979) 764-3496 FAX.
WWW.CSTX.GOV 1, ' .
LTE�PPOL�.#
ADDRESS/LOCATION: _- 24 �_ 3 Ear L l2J a D is P. !v`T.aC0
LOT BLOCK SUBDIVISION SEC/PH- .
BUSINESS/OWNER NAME: - STcE c. S0,c I+ ConiSTguCT'1 Oita PHONE: 1-11 - S0.S 1
CONTRACTOR/HOMEOWNER: cSco'TT PHONE: 7-7-9 -/5'00 t
CONTACT PERSON FOR REVIEW COMMENTS: `7C_(AJ NE- .0 pSo�J. PHONE: Z 7-T Sfu )
FAX: EMAIL: ta) so --.►,e
ELECTRICIAN: PLUMBER:
HVAC: GOOD CENTS (Residential only): " l`
ACCESSORY/STORAGE LOCATION RE -ROOF
ADDITION MOVING SHELL ONLY
DEMOLITION (Asbestos Survey) NEW CONSTRUCTION • SLAB ONLY
DUPLEX (Landscape Plans) REMODEL/RENOVATION' SWIMMING POOL
ri TENT/CANOPY
DESCRIPTION OF WORK: �yo
-
PROPOSED USE: (3 ir-r- t r_ r
HOMEOWNER ASSOCIATIOWARCHITECTUAL OR DESIGN.REVItW
q 4
TEXAS ACCESSIBILITY STANDARD (TAS PROJECT REGISTRAT N# EABPRJ COMMITTEE 6P �o
ACCESSIBILITYPO$ AV nr---
VALUATION: $ 1p , 'j S O TOTAL AREA: a( Z HEATED AREA: 21 Z
�.,'•ID. Qo (Cost of Labor and Materials)
PUBLIC SEWER NUMBER OF BEDROOMS: "
SEPTIC/TREATMENT SYSTEM NUMBER OF BATHROOMS:
SEWER TAP: _ INTERIOR WALL TYPE:
SIZE
WATER TAP: EXTEROR WALL TYPE:
SRE
OTHER TAP: FOUNDATION TYPE:
S¢E
TEMP POLE ROOF TYPE: -
GARAGE TYPE: SINGLE DOUBLE a TRIPLE a
ATTACHED DETACHED a CARPORT
SIGNATURE OF APPLICANT: _ k v
`If proposed work involves new comrrtiercial construction or facade Improvements/renOVationS to an existi
commercial property, building elevations are required. ' ng
_ Official Use my
Plans Examiner Zoning Official
Fire Marshall
C ents:
E or NO
Energy Code Compliance Information
% Glazing of exterior walls
Insulation R value of exterior walls
Insulation R value of ceiling I .(flat areas).
Insul latioh R value 'of *c'eiling 2 (vaulted areas/no attic)
Glazing SHGC (Solar Heat Gain Coefficient)
Glazing U-Factor
RyAlue of ductwork
VC SEER Rating
Protection Against Subterranean Termites
❑ Chemical Tern:dticide Treatment (Soil Treatment)
❑ Chemical Ten-niticide Treatment (Field'Applied Wood Treatment)
❑ Physical Barriers
1:1 Other
*Verification of Application shall be submitted to the City of coeii,n
; neg� Station
Building Department prior to issuance of the Certificate of Occupancy.
o
v
COMcheck Software Version 3.5.2
Interior Lighting Compliance
Certificate
20061ECC
Report Date: 05/27/08
Data filename: Untitled.cck
Section 1: Project Information
Project Type: New Construction
Project Title : Champion Creek
Construction Site: Owner/Agent:
Designer/Contractor:
2423 Earl Rudder Fwy
Scott Eidson
Suite 200
Steelbach Construction
College Station, TX 77845
2429 Earl Rudder Fwy
Suite 100
College Station, TX 77845
979-693-8925
scotte@suddenlink.net
Section 2: General Information
Building Use Description by: Activity Type
Activity Type(s) Floor Area
Office 2426
Section 3: Requirements Checklist
Interior Lighting:
1. Total proposed watts must be less than or equal to total allowed watts.
Allowed Watts Proposed Watts Complies
2426 2392 YES
Controls, Switching, and Wiring:
0 2. Independent controls for each space (switch/occupancy sensor).
Exceptions:
Areas designated as security or emergency areas that must be continuously illuminated.
Lighting in stairways or corridors that are elements of the means of egress.
Lj 3. Master switch at entry to hotel/motel guest room.
Ej 4. Individual dwelling units separately metered.
Lj 5. Each space provided with a manual control to provide uniform light reduction by at least 50%.
Exceptions:
Only one luminaire in space;
An occupant -sensing device controls the area;
The area is a corridor, storeroom, restroom, public lobby or sleeping unit.
Areas that use less than 0.6 Watts/sq.ft.
6. Automatic lighting shutoff control in buildings larger than 5,000 sq.ft.
Exceptions:
Sleeping units, patient care areas; and spaces where automatic shutoff would endanger safety or security.
7. Photocell/astronomical time switch on exterior lights.
Exceptions:
Project Title: Champion Creek Report date: 05/27/08
Data filename: Untitled.cck Page 1 of 7
Lighting intended for 24 hour use.
J'8. Tandem wired one -lamp and three -lamp ballasted luminaires (No single -lamp ballasts).
Exceptions:
Electronic high -frequency ballasts; Luminaires on emergency circuits or with no available pair.
Section 4: Compliance Statement
Compliance Statement: The proposed lighting design represented in this document is consistent with the building plans, specifications
and other calculations submitted with this permit application. The proposed lighting system has been designed to meet the 2006 IECC
requirements in COMcheck Version 3.5.2 and to comply with the m ato requirements in the Requirements Checklist.
L. _Dc- WAYNe_ EaSoN s-. 7_7 - o�
Name - Title Signature Date
Project Title: Champion Creek Report date: 05/27/08
Data filename: Untitled.cck Page 2 of 7
COMcheck Software Version 3.5.2
Interior Lighting Application
Worksheet
2006 IECC
Report Date:
Data filename: Untitled.cck
Section 1: Allowed Lighting Power Calculation
A B C D
Area Category Floor Area Allowed Allowed Watts
(tt2) Watts / ft2 (B x C)
Office 2426 1 2426
Total Allowed Watts = 2426
Section 2: Proposed Lighting Power Calculation
A
Fixture ID : Description / Lamp / Wattage Per Lamp / Ballast
B
Lamps/
Fixture
C
# of
Fixtures
D
Fixture
Watt.
E
(C X D)
Office (2426 sq.ft.)
Linear Fluorescent 1: 24" T8U 32W / Electronic
2
8
64
512
Linear Fluorescent 2: 48" T8 30W (Super T8) / Electronic
4
4
120
480
Incandescent 1: Incandescent 50W
1
10
50
500
Incandescent 2: Incandescent 60W
3
5
180
900
Total Proposed Watts =
2392
Section 3: Compliance Calculation
If the Total Allowed Watts minus the Total Proposed Watts is greater than or equal to zero, the building complies.
Total Allowed Watts = 2426
Total Proposed Watts = 2392
Project Compliance = 34
Project Title: Champion Creek Report date: 05/27/08
Data filename: Untitled.cck Page 3 of 7
l'l
eCOMcheck Software Version 3.5.2
ls(l Mechanical Compliance Certificate
2006 IECC
Report Date: 05/27/08
Data filename: Untitled.cck
Section 1: Project Information
Project Type: New Construction
Project Title : Champion Creek
Construction Site: Owner/Agent:
2423 Earl Rudder Fwy
Suite 200
College Station, TX 77845
Section 2: General Information
Building Location (for weather data): College Station, Texas
Climate Zone: 2a
Heating Degree Days (base 65 degrees F): 1788
Cooling Degree Days (base 50 degrees F): 6851
Section 3: Mechanical Systems List
Designer/Contractor:
Scott Eidson
Steelbach Construction
2429 Earl Rudder Fwy
Suite 100
College Station, TX 77845
979-693-8925
scotte@suddenlink.net
Quantity System Type & Description
1 HVAC System 1: Split System Heat Pump, Cooling Capacity <54 kBtu/h, Air -Cooled Condenser / Single Zone
1 Storage Water Heater 1: Electric Storage Water Heater, Capacity: 60 gallons
Section 4: Requirements Checklist
Requirements Specific To: HVAC System 1 :
1. Equipment minimum efficiency: Heat Pump: 6.8 HSPF, 10.0 SEER
0 2. Heat pump thermostat required when supplemental electric resistance heat is installed
Requirements Specific To: Storage Water Heater 1
Lj 1. Hot water system sized per manufacturer's sizing guide
Li 2. Electric Water Heater efficiency >= 0.85 EF, 291 SL, Btu/h (if > 12 kW)
0 3. First 8 ft of outlet piping is insulated
0 4. Hot water storage temperature adjustable down to 120 degrees F or lower
Lj 5. Heat traps provided on inlet and outlet of storage tanks
Generic Requirements: Must be met by all systems to which the requirement is applicable:
Lj 1. Load calculations per 2001 ASHRAE Fundamentals
0 2. Plant equipment and system capacity no greater than needed to meet loads
Exception: Standby equipment automatically off when primary system is operating
Exception: Multiple units controlled to sequence operation as a function of load
Lj 3. Minimum one temperature control device per system
4. Minimum one humidity control device per installed humidification/dehumidification system
Project Title: Champion,Creek Report date: 05/27/08
Data filename: Untitled.cck Page 4 of 7
5. Automatic Controls: Setback to 55 degrees F (heat) and 85 degrees F (cool); 7-day clock, 2-hour occupant override, 10•hour backup
Exception: Continuously operating zones
Exception: 2 kW demand or less, submit calculations
6. Outside -air source for ventilation; system capable of reducing OSA to required minimum
LI 7. R-5 supply and return air duct insulation in unconditioned spaces R-8 supply and return air duct insulation outside the building R-8
insulation between ducts and the building exterior when ducts are part of a building assembly
Exception: Ducts located within equipment
- Exception: Ducts with interior and exterior temperature difference not exceeding 15 degrees F.
- Exception: Continuously welded and locking -type longitudinal joints and seams on ducts operating at static pressures less than 2
inches w.g. pressure classification
LI 8. Mechanical fasteners and sealants used to connect ducts and air distribution equipment
Lj 9. Ducts sealed - longitudinal seams on rigid ducts; transverse seams on all ducts; UL 181 A or 181 B tapes and mastics
Lj 10. Hot water pipe insulation: 1 in. for pipes <=1.5 in. and 2 in. for pipes >1.5 in. Chilled water/refrigerant/brine pipe insulation: 1 in. for
pipes <=1.5 in. and 1.5 in. for pipes >1.5 in. Steam pipe insulation: 1.5 in. for pipes <=1.5 in. and 3 in. for pipes >1.5 in.
Exception: Piping within HVAC equipment
Exception: Fluid temperatures between 55 and 105 degrees F
Exception: Fluid not heated or cooled
Exception: Runouts <4 ft in length
11.Operation and maintenance manual provided to building owner
0 12.Balancing devices provided in accordance with IMC 603.15
13.Piping, insulated to 1/2 in. if nominal diameter of pipe is <1.5 in.; Larger pipe insulated to 1 in. thickness
0 14.Lavatory faucet outlet temperatures in public restrooms limited to 110 degrees F (43 degrees C)
15.Motorized, automatic shutoff dampers required on exhaust and outdoor air supply openings
Exception: Gravity dampers acceptable in buildings <3 stories
Exception: Gravity dampers acceptable in systems with outside or exhaust air flow rates less than 300 cfm where dampers are
interlocked with fan
16.Stair and elevator shaft vents are equipped with motorized dampers
Section 5: Compliance Statement
Compliance Statement. The proposed mechanical design represented in this document is consistent with the building plans, specifications
and other calculations submitted with this permit application. The proposed mechanical systems have been designed to meet the 2006 IECC
requirements in COMcheck Version 3.5.2 and to comply with the m ato equirements in the Requirements Checklist.
L,. E 'DSot� Z"1 - a Y
Name - Title Signature Date
Project Title: Champion Creek Report date: 05/27/08
Data filename: Untitled.cck Page 5 of 7
COMcheck Software Version 3.5.2
Mechanical Requirements
Description
2006 IECC
Report Date:
Data filename: Untitled.cck
The following list provides more detailed descriptions of the requirements in Section 4 of the Mechanical Compliance
Certificate.
Requirements Specific To: HVAC System 1
1. The specified heating and/or cooling equipment is covered by the ASHRAE 90.1 Code and must meet the following minimum efficiency:
Heat Pump: 6.8 HSPF, 10.0 SEER
2. Heat pumps having supplementary electric resistance heat must have controls that, except during defrost, prevent supplementary heat
operation when the heat pump can meet the heating load.
Requirements Specific To: Storage Water Heater 1 :
1. Service water heating system design loads for the purpose of sizing systems and equipment must be determined in accordance with
manufacturers' published sizing guidelines.
2. Service water heating equipment used solely for heating potable water, pool heaters, and hot water storage tanks must meet the
following miniumum efficiency: Electric Water Heater efficiency >= 0.85 EF, 291 SL, Btu/h (if > 12 kW)
3. Insulation must be provided for the first 8 ft of outlet piping for a constant temperature nonrecirculating storage system and for the inlet
pipe between the storage tank and a heat trap in a storage system.
4. Temperature controls must be provided that allow for storage temperature adjustment from 120 degrees F or lower to a maximum
temperature compatible with the intended use except when the manufacturer's installation instructions specify a higher minimum
thermostat setting to minimize condensation and resulting corrosion. Documentation of the installation instructions must be provided to
be exempted from this requirement.
5. Heat traps must be provided on inlet and outlet vertical pipe risers serving storage water heaters and storage tanks not having integral
heat traps and serving a nonrecirculating system. Heat traps must be installed as close as practical to the storage tank. Acceptable heat
traps are either a) a device specifically designed for the purpose or b) an arrangement of tubing that forms a loop of 360 degrees F,
or c) piping that from the point of connection to the water heater (inlet or outlet) includes a length of piping directed downwards before
connection to the vertical piping of the supply water or hot water distribution system.
Generic Requirements: Must be met by all systems to which the requirement is applicable:
1. Design heating and cooling loads for the building must be determined using procedures in the ASHRAE Handbook of Fundamentals or
an approved equivalent calculation procedure.
2. All equipment and systems must be sized to be no greater than needed to meet calculated loads. A single piece of equipment providing
both heating and cooling must satisfy this provision for one function with the capacity for the other function as small as possible, within
available equipment options.
- Exception: The equipment and/or system capacity may be greater than calculated loads for standby purposes. Standby equipment
must be automatically controlled to be off when the primary equipment and/or system is operating.
- Exception: Multiple units of the same equipment type whose combined capacities exceed the calculated load are allowed if they are
provided with controls to sequence operation of the units as the load increases or decreases.
3. Each heating or cooling system serving a single zone must have its own temperature control device.
4. Each humidification system must have its own humidity control device.
5. The system or zone control must be a programmable thermostat or other automatic control meeting the following criteria:a) capable
of setting back temperature to 55 degrees F during heating and setting up to 85 degrees F during coolingb) capable of automatically
setting back or shutting down systems during unoccupied hours using 7 different day schedulesc) have an accessible 2-hour occupant
overrided) have a battery back-up capable of maintaining programmed settings for at least 10 hours without power.
Exception: A setback or shutoff control is not required on thermostats that control systems serving areas that operate continuously.
Exception: A setback or shutoff control is not required on systems with total energy demand of 2 kW (6,826 Btu/h) or less.
6. The system must supply outside ventilation air as required by Chapter 4 of the International Mechanical Code. If the ventilation system is
designed to supply outdoor -air quantities exceeding minimum required levels, the system must be capable of reducing outdoor -air flow to
the minimum required levels.
7. Air ducts must be insulated to the following levels:a) Supply and return air ducts for conditioned air located in unconditioned spaces
(spaces neither heated nor cooled) must be insulated with a minimum of R-5. Unconditioned spaces include attics, crawl spaces,
Project Title: Champion Creek Report date: 05/27/08
Data filename: Untitled.cck Page 6 of 7
unheated basements, and unheated garages.b) Supply and return air ducts and plenums must be insulated to a minimum of R-8 when
located outside the building.c) When ducts are located within exterior components (e.g., floors or roofs), minimum R-8 insulation is
required only between the ducttsand the building exterior.
Exception: Duct insulation is not required on ducts located within equipment.
Exception: Duct insulation is not required when the design temperature difference between the interior and exterior of the duct or
plenum does not exceed 15 degrees F.
Exception: Continuously welded and locking -type longitudinal joints and seams on ducts operating at.static pressures less than 2
inches w.g. pressure classification.
8. Mechanical fasteners and seals, mastics, or gaskets must be used when connecting ducts to fans and other air distribution equipment,
including multiple -zone terminal units.
9. All joints, longitudinal and transverse seams, and connectionsin ductwork must be securely sealed using weldments; mechanical
fasteners with seals, gaskets, or mastics; mesh and mastic sealing systems; or tapes. Tapes and mastics must be listed and labeled in
accordance with UL 181A and shall be marked '181A-P' for pressure sensitive tape,'181A-M' for mastic or'181A-H' for heat -sensitive
tape. Tapes and mastics used to seal flexible air ductsand flexible air connectors shall comply with UL 181 B and shall be marked
'181 B-FX' for pressure -sensitive tape or'181 B-M' for mastic. Unlisted duct tape is not permitted as a sealant on any metal ducts.
10. All pipes serving space -conditioning systems must be insulated as follows: Hot water piping for heating systems: 1 in. for pipes <=1
1/2-in. nominal diameter 2 in. for pipes >1 1/2-in. nominal diameter, Chilled water, refrigerant, and brine piping systems: 1 in. insulation
for pipes <=1 1/2-in. nominal diameter 1 1/2 in. insulation for pipes >1 1/2-in. nominal diameter. Steam piping: 1 1/2 in. insulation for
pipes <=1 1/2-in. nominal diameter 3 in. insulation for pipes >1 1/2-in. nominal diameter.
- Exception: Pipe insulation is not required for factory -installed piping within HVAC equipment.
- Exception: Pipe insulation is not required for piping that conveys fluids having a design operating temperature range between 55
degrees F and 105 degrees F.
- Exception: Pipe insulation is not required for piping that conveys fluids that have not been heated or cooled through the use of fossil
fuels or electric power.
- Exception: Pipe insulation is not required for runout piping not exceeding 4 ft in length and 1 in. in diameter between the control valve
and HVAC coil.
11. Operation and maintenance documentation must be provided to the owner that includes at least the following information:a) equipment
capacity (input and output) and required maintenance actionsb) equipment operation and maintenance manuaisc) HVAC system
control maintenance and calibration information, including wiring diagrams, schematics, and control sequence descriptions; desired
or field -determined set points must be permanently recorded on control drawings, at control devices, or, for digital control systems, in
programming commentsd) complete narrative of how each system is intended to operate.
12. Each supply air outlet or diffuser and each zone terminal device (such as VAV or mixing box) must have its own balancing device.
Acceptable balancing devices include adjustable dampers located within the ductwork, terminal devices, and supply air diffusers.
13. Service hot water piping, where required, must be insulated to 1/2 in. if pipe less than 1.5 in. nominal diameter. Larger pipe must be
insulated to 1 in.. Pipe insulation will have a conductivity of less than 0.28 Btu. in/(h-ft2-degrees F).
14. Temperature controlling means must be provided to limit the maximum temperature of water delivered from lavatory faucets in public
facility restrooms to 110 degrees F.
15. Outdoor air supply and exhaust systems must have motorized dampers that automatically shut when the systems or spaces served
are not in use. Dampers must be capable of automatically shutting off during preoccupancy building warm-up, cool -down, and setback,
except when ventilation reduces energy costs (e.g., night purge) or when ventilation must be supplied to meet code requirements. Both
outdoor air supply and exhaust air dampers must have a maximum leakage rate of 3 cfm/ft2 at 1.0 in w.g. when tested in accordance
with AMCA Standard 500.
Exception: Gravity (non -motorized) dampers are acceptable in buildings less than three stories in height.
Exception: Systems with a design outside air intake or exhaust capacity of 300 cfm (140 Us) or less that are equipped with motor
operated dampers that open and close when the unit is energized and de -energized, respectively.
16. Stair and elevator shaft vents must be equipped with motorized dampers capable of being automatically closed during normal building
operation and interlocked to open as required by fire and smoke detection systems. All gravity outdoor air supply and exhaust hoods,
vents, and ventilators must be equipped with motorized dampers that will automatically shut when the spaces served are not in use.
Exceptions: - Gravity (non -motorized) dampers are acceptable in buildings less than three stories in height above grade. - Ventilation
systems serving unconditioned spaces.
Project Title: Champion Creek Report date: 05/27/08
Data filename: Untitled.cck Page 7 of 7
City of College Station Page of
qf Building Inspection Department
PLANS EXAMINATION REPORT
Address: Z ci 7--3 E4rl 9,a le, &- -2.51-2S
Project Name: bg4e F,'✓i .1 k Oc-t-s
Drawing Code
Number Ref. Number Questions or Comments
- lvlG Ko 3, 3 �irn. c 1C�ta c.-s X?P mo
Received by: Date: