HomeMy WebLinkAboutStreet Light Standards and SpecificationsStreet Light Standards and Specifications
University Heights Phase 1
Cobrahead, 100 watt HPS, Lens Type / Cutoff, bronze color
American Electric Cat # 1151 0SXNMT 1 R2FGBZOP
35 ft Pole w/ 8 ft arm direct embedded street light pole
Pole, Street Light, (color: dark bronze, emerald green or black) powder top coated, steel,
round, 35 ft. shaft length (one piece), 30 ft. mounting height, tapered shaft, embedded type,
with 8 ft. mast arm, 2" slip fitter. Hand hole with hand hole cover to be furnished with tamper-
proof screw and ground lug 18 inches above ground line. All hardware shall be packaged
individually for each pole. Wiring slot 3 foot from bottom of pole. Pole shall be Coal Tar
Epoxied, bottom 5 foot. Finished with a combination of galvanized and powder coat top finish
in a dark bronze polyester color, for both pole and mast arm. Exterior coat shall provide for all
galvanized surfaces visually exposed to be coated with a Urethane or Trigly -cidyl Isocyanurate
(TGIC) Polyester Powder to minimum film thickness of 2.0 mils. The coating shall be
electrostatically applied and cured in a convection oven by heating the steel substrate to a
minimum of 350 degree F and a maximum of 400 degree F. The pole finish shall be guaranteed
for a minimum period of ten (10) years with maintenance Pole to be capable of withstanding a
sustained wind velocity of not less than 80 miles per hour Isotach (MPHI) with a gust factor of
1.3. Bidder shall furnish sufficient catalog and reference information with his bid to permit the
Engineer to substantiate equality for any proposed substitution.
Valmont#EM30730A35085FP1 GVHH