HomeMy WebLinkAbout12-78_Page_08Streets, Parking, and Sidewalks
x❑ Existing streets and sidewalks (R.O.W.).
X❑ Existing Driveways, both opposite and adjacent to the site according to UDO, Article 7.
❑x Proposed drives. Minimum drive aisle width according to UDO, Article 7
0 Indicate proposed driveway throat length according to UDO, Article 7
❑x Proposed curb cuts.
❑x For each proposed curb cut (including driveways, streets, alleys, etc.) locate existing curb cuts on the same and
opposite side of the street to determine separation distances between existing and proposed curb cuts.
Proposed curb and pavement detail.
xJ A 6" raised curb is required around all edges of all parts of all paved areas without exception. (To Include island,
planting areas, access ways, dumpster locations, utility pads, etc.) No exception will be made for areas
designated as "reserved for future parking".
❑x Proposed medians.
❑x Proposed sidewalks (both public and private).
0 Proposed pedestrian/bike circulation and facilities for non-residential buildings (UDO, Article 7).
❑x Off -Street parking areas with parking spaces drawn, tabulated, and dimensioned.
Designate number of parking spaces required by ordinance and provided by proposal.
,Handicap parking spaces.
Parking Islands drawn and dimensioned with square footage calculated according to UDO, Section 7.2 or 7.9 fornon-
residential buildings.
f ❑x Parking setback from R.O.W. to curb of parking lot as required.
EWheelstops may be required when cars overhang onto property not owned by the applicant or where there may be
conflict with pedestrian or bike facilities, handicap accessible routes or above ground utilities, signs or other conflicts.
Security gates, showing swing path and design specs with colors.
]_Guardrails. Include design and colors.
Traffic Impact Analysis for non-residential development (UDO, Article 7).
x❑ Please note if none is required.
❑x Will there be access from a TxDOT R.O.W.? x❑ Yes ❑ No
If yes, then TxDOT permit must be submitted with this application.
Easements and Utilities
❑x Easements - clearly designate as existing or proposed and type (utility, access, etc.)
❑x Utilities (noting size and designate as existing or proposed) within or adjacent to the proposed site, including building
transformer locations, above ground and underground service connections to buildings, and drainage inlets.
❑ Sewer Design Report (if applicable).
❑ Water Design Report and/or Fire Flow Report (if applicable).
x❑ Drainage Report with a Technical Design Summary.
❑x Meter locations, existing and proposed (must be located in public R.O.W. or public utility easement).
❑x Provide a water and sanitary sewer legend to include
❑x Minimum water demands
❑x Maximum water demands
❑x Average water demands in gallons per minute, and
❑x Maximum sewer loadings in gallons per day
❑x Will there be access from a TxDOT R.O.W.? ❑x Yes ❑ No
If yes, then TxDOT permit must be submitted with this application.
try 1 Page 8 of 11