HomeMy WebLinkAboutStaff CommentsTO:
FROM:
SUBJECT:
CITY OF COLLEGE STATION
Home of
TexmAdM ry
Univent '
�1101 Texas Avenue, P.O. Box 9960
College Station, Texas 77842
Phone 979:764.3570 / Fax 979.764.3496
MEMORANDUM
December 16, 2011 t /
Natalie Ruiz, IPS Group, via email: Natalie@ipsgroup.us V
Matt Robinson, AICP, Senior Planner
CHIMY'S CERVECERIA (SP)
Thank you for the submittal that completes your SITE PLAN - COMMERCIAL application. This
project will be distributed to staff next week for their review.
cc: Chad Baccus, via email: chad(a)chimvs.com
Chris Sagura, Paul Anthony & Associates, LLC via email: chris paulanthon asso .con
f/
Veronica Morgan, Mitchell & Morgan, LLP via email: v mitchellandmor an.c
Case file no. 11-00500196
Case file no. 11-00500197
STAFF REVIEW COMMENTS NO. 1
Chimy's Cerveceria - NG Review
11-00500197
PLANNING
1. The new kitchen cooler should be calculated as part of the building square footage. It must
be included in the new second story addition and be shown on the exterior elevation
drawings. Sheet A1.2 shows the cooler to be 238 SF in area. This addition will cause the
project change to exceed the 50% threshold identified in Section 9.3 of the Unified
Development Ordinance. The bathroom being added for ADA purposes does not have to be
included in the square footage of change. Please revise.
2. Two architectural relief elements and a public entrance are required on the fagade facing
Patricia Street. The wood on this fagade also exceeds the maximum of 20%.
3. The front elevation, facing University Drive, lacks one architectural relief element on the
west side.
4. The wood on fagade A.2.Elevation 2 exceeds the maximum of 20%.
5. If railings are added, they must be decorative to comply with landscaping requirements
found in Section 5.6.B.9.b of the Unified Development Ordinance. Please submit a picture
of the proposed railing.
6. Shed roofs are prohibited in Northgate. Please reduce the slope to create a flat roof or
select a different roof type.
7. Corrugated metal is not an approved roof material. Standing seam metal is an approved
alternative that you may choose to utilize.
8. Please identify the material and color of the awnings. FYI... corrugate metal is not an
approved material.
9. The existing columns on the side of the building appear to be steel. Since the fagade
materials are being brought into compliance and steel is not an approved material (except
for doors), the columns must be covered.
10. Transparency on the front fagade facing University Drive must be 50% and the Patricia
Street fagade must be 30%.
11. Please add the following items to the materials legends:
a. Total fagade square footage.
b. Square footage and percentages for the colors being used.
c. Percentage of each material and transparency per fagade.
d. Square footage and percentage of metal used on each fagade.
12. Please add a note that all signage is permitted separately. lot for the
13. Please add a note that 203 University Drive shall be considered a building p
purpose of signage, landscaping, and architectural requirements.
Reviewed by: Lauren A. Hovde, Staff Planner
Date: December 29, 2012